Rain and snow sensor

Rain and snow sensor product introduction:

The Rain and snow sensor is an instrument that measures whether it rains or snows outdoors or in nature. It adopts a detection circuit and adopts a grid-shaped electric sensor to detect the outside rain and snow conditions.

Measure whether there is rain or snow, the response time is ≤0.5S.

AC measurement technology prevents oxidation reactions on the sensing plate and ensures long-term sensitivity.

Designed with IP68 protection level, it can work outdoors for a long time.

A variety of transmission methods are available, providing 485 mode upload or switch output to facilitate centralized monitoring.

Optional automatic heating function can be used for snow detection to prevent freezing in situations where the temperature is below 0 degrees for a long time and in high-humidity environments.

When heating, the temperature is strictly controlled within 40°C (default) to prevent overoxidation caused by dry burning and extend the service life.

The sensor sensitivity is adjustable, making it more flexible to use.

Alarm and return delays can be set to avoid frequent alarms on site.

Power supply: 10~30V DC

Normal working power: 0.4W

Storage environment: -40℃~80℃

Working power during heating: 2.4W

Working temperature environment: -40℃~60℃

Output signal: 485, relay

Default modbus address: 01

Support function codes: 03, 06

Heating start ambient temperature: <15℃ (default) Maximum heating temperature: 40℃ (default)

Output relay load capacity: 250VAC 1A/30VDC 1A