Product
-
Weather station
-
Portable Weather Station
-
Weather Sensor
-
Visibility Monitoring
-
Cloud and aerosol observation
-
Atmospheric environment monitoring station
Recommended article
- Small weather station for rain, snow and wind monitoring
- Integrated forest fire risk factor monitoring station component
- What is an on-farm microclimate monitoring system?
- Negative Oxygen Ion Detector Company
- Small Weather Station Brand Ranking
- Small Intelligent Weather Station Manufacturer Recommendation
Contact us
Shandong Fengtu IOT Technology Co., Ltd
Sales Manager:Ms. Emily Wang
Cel,Whatsapp,Wechat:+86 15898932201
Email:info@fengtutec.com
Add:No. 155 Optoelectronic Industry Accelerator, Gaoxin District, Weifang, Shandong, China
Thermoelectric total radiation sensor
Model:FT-FS2
Brand:fengtu
Related products
Thermoelectric total radiation sensor technical specifications
Thermoelectric total radiation sensor is a measurement instrument for monitoring solar radiation and ambient temperature by using the principle of thermoelectric effect.、
·Power supply: DC12V
·Power consumption: 0.06W
·Working environment: -20~70℃
·Communication interface: RS485
·Operating current: 5mA@DC12V
·Minimum data interval: 0.5S
Thermoelectric total radiation sensor parameters
parameter | scope | resolution | Accuracy | unit |
total radiation | 0-2000 | 1 | <±3% | W/m² |
sunshine hours | 0-6500 | 0.1 | < 0.2 | h |
Response time: ≤10S
Annual stability: ≤±3.1%
Zero point drift: ≤6W/m²
Thermoelectric total radiation sensor precautions
1. A protective cover must be installed during the transportation and storage of the sensor to prevent the sensor from being damaged by collision.
2. The installation and use of sensors should strictly comply with relevant technical indicators and installation instructions.
3. The sensor needs to be installed in an open, unobstructed, and non-reflective and refracted light environment.
4. The sensor should be installed away from other heat sources other than the sun and high-heat metals and other media.
5. The sensor installation should be adjusted to the horizontal position according to the horizontal ball of the sensor.
6. After installing the sensor, you need to install a light hood
7. After the sensor is installed, use a dust-free cloth to regularly clean and wipe the dust and debris on the glass cover.
Related article
-
Forest weather stations to protect against hill fires
2024-04-08 -
Negative oxygen ion monitoring system to create a scenic image
2024-04-02 -
Negative Oxygen Ion Detector Company
2024-05-14 -
Dust monitoring equipment selection points
2024-02-07 -
Introduction to the Integrated Forest Climate Fire Risk Factor Monitoring Station
2024-04-26 -
All-in-one vehicle-mounted weather station
2024-04-10 -
Portable Weather Station "Highlights"
2024-01-31 -
Principle of field mini weather station
2024-04-09