Illumination detector in tunnel

Illumination detector in tunnel can detect the brightness of the tunnel, mainly used inside the tunnel to evaluate the illumination level of the tunnel lighting system.Illumination detector in tunnel can fully meet the requirements of the entire tunnel lighting control. The controller in the preset control mode automatically switches the lighting switch according to the preset parameters based on the measured value of the light source, providing the best value for tunnel lighting. Its design fully complies with CIE's requirements for tunnel lighting measurement and can meet the "Road Tunnel Ventilation and Lighting Design Code", and its overall design can fully meet the requirements of harsh working environments in the wild.

Illumination detector in tunnel product features:

1. There is a good linear relationship between brightness and photocurrent.

2. The equipment has its own LCD screen, which can display status operation status, fault alarm and data storage functions.

3. Multiple ranges available.

4. The photovoltaic cells are calibrated at room temperature of 25°C, and the error is automatically corrected to less than ±1% during actual operation.

5. The measurement characteristics are linear and can respond instantaneously to light changes.

6. Multiple output methods are available for convenient data transmission.

Illumination detector in tunnel installation method:

The Illumination detector in tunnel is installed on the wall of a designated area in the tunnel. In order to avoid damage to it due to accidents or car wrecks, it needs to be installed at a height of about 4m and at a suitable location greater than 10m from the tunnel entrance. The tunnel brightness monitor is installed at a suitable position outside the tunnel at a height of about 4m from the road surface and about 120-200m from the tunnel entrance. High reliability and low maintenance. Latest microprocessor technology, fully digital operation and installation

Debugging is easy.

Illumination detector in tunnel can detect the brightness of the tunnel, mainly used inside the tunnel to evaluate the illumination level of the tunnel lighting system.: